- Effective support for smaller components or speakers
- Set of 4 cones
- Also available as a set of 3
- Can be glued, bolted or screwed to your equipment, or used 'freestanding'
- 25mm diameter x 18mm height
Small Cone Feet can be glued or bolted to metal cased equipment - or screwed to wooden cased speakers - point down, or used freestanding and points up. Just choose your preferred method of fitting.
Fitting Tip!
We've found the best glue to use is actually Pritt. It's easy to apply and sticks to virtually any surface. Apply a thin layer to the flat side of the cone, attach to the equipment and leave to dry. Use the weight of the equipment to ensure a good bond. They can also be easily removed by gently tapping the side of the cone with a small hammer. Any residue of glue can be removed with a damp cloth (soaked in hot, soapy water is best).
Our Opinion
Placing Cone Feet under your Hi-Fi or Home Cinema equipment gives a large and immediately obvious improvement. The sound becomes clearer, cleaner more dynamic and much more stable and ‘solid’.
Sizes of Cone Feet
Mini: 18mm diameter x 10mm high
Small: 25mm diameter x 18mm high
Big: 37mm diameter x 20mm high
Jumbo: 55mm diameter x 30mm high
Due to the handmade nature of our cones the above dimensions may vary by a fraction or so. However, each cone is matched with ones of identical size when made into sets or three or four.
Don't forget! We’re confident in the performance of our Cone Feet that they are covered by our 60 Day Home Trial with Money Back Guarantee. Buy the product and if you're not completely satisfied, you can return it within 2 months for a refund. For full details