Evolution-300 PowerKord USA PLUG TO W320 IEC

The Evolution-300 PowerKord™ uses twice as many woven conductors as the Evolution-100 and is perfect for use with any Hi-Fi component, from sources and preamps through to power amps. It is also effective when used with any of our mains extensions including the top-of-the-range X8 PowerBlock Perfectionist, and our Balanced Mains Units. Assess for yourself the improvements it can make - our money-back guarantee gives you 60 days to try it out.



The Evolution-300 PowerKord™ shown with Wattgate W5266evo wall plug plug and W320evo IEC connector.



The new Evolution range of PowerKords features Kimber Kable’s new high purity copper (the highest purity ever found in a PowerKord) and our new earth geometry, which reduces the amount of noise induced into the earth by 20 times over the previous model. They really are an evolution of the design that we've loved for the past three decades and are the best performing PowerKords we've ever made.

• Evolution-300 uses sixteen separately-insulated Kimber Kable conductors, woven together to reduce Radio Frequency Interference (RFI).
• Progressing from the established 'earth down the centre' woven cable design used in earlier PowerKords, Evolution-300 features our new, Low Induced Noise earth geometry, where the earth is helically wound around the outside of the weave.
• Kimber have been working on the purity of the copper wire used in the PowerKords' braid; the new Evolution range features the highest purity copper ever used in a PowerKord.
• The Evolution-300 PowerKord™ is encapsulated in a Noise Reduction sleeving which uses a combination of two strand thicknesses to achieve flexibility and a soft, tactile feel to the cable.
• High performance Wattgate audio grade wall plugs and IEC connectors are used to ensure a positive, low-resistance connection to your component.

Internal constuction of Evolution-300 showing the 16 braided live and neutral conductors and the helically-wound, Low Induced Noise earth.






Most Hi-Fi and Home Cinema components - such as your CD player or integrated amp - are fitted with a standard 15A IEC socket (110-120v). For these, along with our X-Blocks™, choose the W320evo standard IEC (pictured above, left).

Some high-end manufacturers, for example Audio Research, use a 20A 'high-current' connector (110-120v). In these cases, you'll need to choose the Wattgate W320i High Current IEC (pictured above, right).

IMPORTANT
Wattgate IEC connectors are designed to make a very tight connection to the pins of the IEC socket on your equipment or on our mains extensions - the better the connection, the better the performance. Consequently, they need to be pushed home very firmly. We strongly recommend watching our instructional video before fitting to ensure your Wattgate IEC is connected properly to the equipment.






If your equipment has a mains lead fitted directly into the unit that can't be removed, our Male IEC adaptor pack creates an inline IEC socket and lets you upgrade your power cable. Click here for more information.


UK, Euro and US plugs are available on all PowerKords. Other international plugs are also available - Contact Us for more information.


From left to right: UK, Euro and US plugs




We offer a number of additions and treatments to take the performance of your Evolution-300 PowerKord™ to the next level: these options are at the top of the page close to the 'Add to Basket' button. To find out more about the options, click on what’s this? next to the icons.



16 high conductivity oxygen free electrolytic VariStrand copper conductors

---

Kimber’s unique woven cable geometry for effective interference rejection

---

Teflon insulation

---

Helically wound, Low Induced Noise earth

---

Flexible Noise Reduction sleeving

---

Russ Andrews edition Wattgate W320evo IEC plug fitted as standard. Wattgate plugs feature Deep Cryogenic Treatment (DCT)

---

Audio grade Wattgate W5266evo wall plug

---

UK and EURO wall plug options

---

Hand built in the UK

---

Lifetime Warranty

---