Clarity Pro 2.0 Standard

• Active mains conditioner
• Fully user adjustable
• Brand new circuit design

The Clarity Pro 2.0 is one of a family of active mains conditioners. We’ve been big fans of these since Russ first heard the original QRT Quantum Symphony at the Consumer Electronics Show (CES) in Las Vegas in 2006, and we added it to the range later that year.




Fast forward a number of years, QRT was then replaced by an a new, updated and more effective design - this time produced in conjunction with ourselves - the hugely successful Clarity Pro. Component supply shortages, however, led to a break in production that saw us re-introducing an update on the original Quantum Symphony, the new Symphony and Symphony Pro.

Last year, however, the core designers of the Clarity Pro contacted us to say that they were working on prototypes for a new generation of active mains conditioners. They had designed a new circuit that, they told us, resulted in a stronger, more powerful unit. We were intrigued and worked with them on the design (we were involved at this prototyping stage), to fine tune the circuit.

The new design of the circuit board is a little larger than the original Clarity Pro, so we manufactured a new, custom-designed ABS case. Clarity Pro 2.0 is powered by a separate power supply – a ‘wall-wart’ type, 12V DC supply is included or, for best performance, Clarity Pro 2.0 can be supplied with one of our Supplier DC power supplies.


Using the new Clarity Pro 2.0 couldn’t be easier. It’s designed to work in conjunction with any existing mains filters – it doesn’t replace them.





The key to using it is its position. Ideally, sit it close to your components – a spare shelf on your Hi-Fi rack is ideal, but it can also be put on top of components if there’s room. There’s no harm in positioning it behind or just to the side of your rack if there isn’t room on your shelves.

A single control knob is provided on the front of the unit to adjust the strength of the effect.

We found that one Clarity Pro 2.0 is sufficient for almost all systems – unlike the older Clarity Pro, there’s no additional benefit to be had from using more than one unit.


There is a comprehensive number of adjustable parameters available to fine tune the Clarity Pro 2.0. As well as the obvious external Area Control knob, there is also a bank of internal dip swiches which allow you tune your Clarity Pro 2.0 to your personal taste.







The Clarity units have the subjective effect of ‘calming’ the overall musical presentation - without losing the excitement in a performance - and the new Clarity Pro 2.0 is no exception.

On receiving the first prototype, Russ thought it a major improvement over the older Clarity Pro and Symphony models. As well as providing a calmer atmosphere, meaning that the music is more relaxing and enjoyable to listen to, he found that the improvements to the musicality – the increased appreciation of rhythm and timing – are what really stood out.

Another benefit was with recordings that had previously sounded ‘fierce’, making them less harsh and, again, more enjoyable to listen to.

While the Area Control can be adjusted once and left, Russ found that some recordings benefited from a stronger field (i.e. they benefited from being ‘turned up’), while others sounded best with it turned down. Trust your ears – if it sounds better, then it is better!
With the Standard version, everything you need is in the box

• Clarity Pro 2.0
• Standard 12v power supply
• User instructions
• Casework Allen key
  
  

Upgrade the standard version psu with The Supplier for an audiophile-quality power supply, tailored specifically for the Clarity Pro 2.0. The Supplier DC™ utilises an extremely high-performance, upgraded switched mode power supply, Kimber Kable™ internal wiring and Silencer™ mains filtration.
Find out more about the Clarity Pro 2.0 with Supplier DC here.







Technology
Active mains conditioner

---

Adjustability
Front mounted knob / Internal dip switches

---

Connections
Robust, 2 pin DC socket with locking collar

---

Indicators
Soft, green front mounted LED

---

Casework material
Impact and fire resistant ABS case

---

Power Input
Requires 12v, 1.5A minimum, Included adapter: 12v, 1.5A

---

Dimensions and weight
Width: 152mm Depth: 232mm (includes socket and front knob) Height: 55mm Weight: 500g (excludes power supply)






Don't forget! We are so confident in the performance of this product that it is covered by our 60 Day Home Trial with Money Back Guarantee. Buy the product and if you're not completely satisfied, you can return it within 2 months for a refund. For full details click here.

---