Casework Ground Tag Pack of 10

A pack of 10 chassis tags that allow you to easily connect our Ground Wires to your equipment.

Grounding casework is very simple to achieve. The basic components are some grounding wires, some means of connecting the wires to the casework, an RF Router and a wall socket with earth terminal.

To make wiring everything up easier, we have ready-made grounding wires and these tags. To connect a ground wire to your casework, simply remove one of the casework screws and fit a casework tag, then refit the casework screw, securing the tag tight to the metal case.

In our example images above, our casework is bare copper, but if the casework is painted, strip a little of the paint off before tightening the tag to ensure you are getting a good connection. Do this on each source, and fit a grounding tag to the preamp, or to your integrated amp.

The grounding wires (which are fitted with the appropriate spades) simply push on to the tags and connect everything together; they are easily removed if you need to move or rearrange anything.

Russ has produced a guide explaining how to effectively ground your system: