Big Cone feet set of 4

• Effective support for components or speakers


• Set of 4 cones


• Also available as a set of 3


• Can be glued or freestanding


• 37mm diameter x 20mm height

Our Big Cone Feet are easily glued or even rested to metal cased equipment, fitted in place of spiked feet on speakers or equipment racks, or attached to wooden cased speakers, point down. Or, use them freestanding and points up. Just choose your preferred method of fitting.

Fitting Tip!

We've found the best glue to use is actually Pritt. It's easy to apply and sticks to virtually any surface. Apply a thin layer to the flat side of the cone, attach to the equipment and leave to dry. Use the weight of the equipment to ensure a good bond. They can also be easily removed by gently tapping the side of the cone with a small hammer. Any residue of glue can be removed with a damp cloth (soaked in hot, soapy water is best).


Placing Cone Feet under your Hi-Fi or Home Cinema equipment gives a large and immediately obvious improvement. The sound becomes clearer, cleaner more dynamic and much more stable and ‘solid’.




Mini: 18mm diameter x 10mm high

Small: 25mm diameter x 18mm high

Big: 37mm diameter x 20mm high

Jumbo: 55mm diameter x 30mm high

Due to the handmade nature of our cones the above dimensions may vary by a fraction or so. However, each cone is matched with ones of identical size when made into sets or three or four.