Backbox Saver
Backbox Saver! Save time and money by fixing your metal back box
Problem
The threads in the lugs securing the socket or switch into the back box can strip, meaning the socket cannot be firmly fitted. The current solution — replacing the back box just because of a stripped lug — is time-consuming and costly.
Solution
Back Box Saver allows the back box still to be used, by overlaying a reinforced nut onto the stripped lug to provide a secure fixing for the screw to engage. Back Box Saver fits most lugs and repairs a stripped thread in most cases. BBS is also useful for aligning wonky wall sockets.
Benefits of the Back Box Saver
The Back Box Saver saves the installer the time and trouble of replacing the back box. The householder is saved the cost and upheaval of re-decoration. Back Box Savers are low-cost, easy to install, secure, and maintain the earth connection.
What's included
Money Back Guarantee
Don't forget! We are so confident in the performance of this product that it is covered by our 60 Day Home Trial with Money Back Guarantee. Buy the product and if you're not completely satisfied, you can return it within 2 months for a refund. For full details click here.
Step 1
TURN OFF THE POWER. Remove the faceplate and disconnect the wiring.
Step 2
Identify the damaged lug. Enlarge hole by use of an approved BBS reamer accessory or careful use of an electric drill.
Step 3
Select appropriate sleeve size (red, green or blue). Fit reinforced T-fixing. Squeeze Back Box Saver to open the sleeve.
Step 4
Slide the Back Box Saver over the damaged lug. Fits most lugs first time.
Step 5
Make sure the holes align.
Step 6
Replace the screws, tighten as normal and switch the power back on.
The existing 3.5mm faceplate screw can re-used in most cases even if the thread has been damaged as the Back Box Saver has been designed to overcome this problem. Should you require it, a replacement screw is included.
